Publish Time: 2022-11-23 Origin: Site
Delem DA53T -Compact 4-axes touch colour CNC system for press brakes
1.The new compact DA-53T adds a state of the art complete touch control solution for synchronized press brakes.
This panel based control, standard capable of controlling up to 4 axes,
can be integrated in cabinets as well as used in an optional pendulant arm housing. Its 10.1" wide screen high resolution colour TFT,
with industrial grade multi touch technology, gives access to the proven Delem user- interface.
It enables direct “hot-key” touch navigation between product programming and actual production.
Functions are located where needed, offering optimised ergonomics throughout the entire application.
2.Machine adjustment and test bends are reduced to a minimum with a quick and easy program-to-production work sequence.
3.The standard machine control functions are Y1-Y2, X, R-axis and crowning. The second back gauge axis can also be set as Z axis.
DA53T Features:
-"Hot-key” touch navigation
-10.1" high resolution colour TFT
-Up to 4 axes (Y1,Y2 + 2 aux. axes)
-Crowning control
-Tool / material / product library
-Servo and frequency inverter control
-Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
-TandemLink (option)
-USB memory stick interfacing
-Profile-53TL offline software
Technical Specification:
1.General
- Multi touch industrial touch screen
- Instant Shut Off
2.Electrical / interfacing
- Power supply: 24V
- Opto-isolated digital I/O
- Integrated valve amplifier Y1, Y2, P
- Encoder inputs (single/diff.5V/12V)
- RS232 port for safety PLC
- USB port
3.Control
- Servo control
- Unipolar / frequency inverter control
- Pressure valve control
- Proportional valve control
- Crowning control
- Multiple digital function outputs
4.Mechanical
- Housing 373x368x122 mm
- Panel 311x222x60mm
- Design, glass surface, aluminium edge
- IP54
Weight 9 kg (incl. housing)
5.Programming
- Alphanumerical product naming
- Hemmed products programming
- Radius programming (bumping)
- One page programming table
- Programmable material properties
- Programmable axis speed
- Millimetres/Inches, kN/Ton selection
- Stock counter
6.Tooling
- Tool library 30 punches / 30 dies
- Alphanumeric tool identification
- Hemming tools
Radius tools
7.Computed
- Tooling safety zones
- Press force
- Bend allowance
- Crowning adjustment
- Bottoming force
- Hemming force
- Auto bumping calculation
- Learned angle correction database
8.Miscellaneous
- ‘Teach-in’ on all axes
- Operator selectable dialogue languages
- Error messaging system
- Diagnostic program
- Machine time + stroke counter
- On board Analysis Tool
- Sequencer functionality (PLC)
Safety PLC interfacing